RE: [DML] no start problem

["Scott Mueller" <scott.a.mueller@xxxx>]

David,
Your injector should not pop out. Make sure that you have the 3 pronged
retaining clip seated properly.

Scott Mueller
002981
scott.a.mueller (at) att.net

-----Original Message-----
From: Delorean17@xxxx [mailto:Delorean17@xxxx]
Sent: Tuesday, May 21, 2002 7:08 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] no start problem


Hi,
Not sure if this is your problem but it just happened to me today after
school. I drove the car for about 15 miles and then shut it off. When I
came back, the car would just sputter and not stay running. I opened up the
engine compartment to find that one of the fuel injectors popped out of
place, I snapped it back into place and the car started right up. Just
something to check.

David