Re: [DML] no start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] no start problem



Matthew, I didn't see where you said hot or cold and you have two different 
circuits. 
If it's the cold, then the TTS switch or a wire maby be loose causing the 
cold start not to fire off, If it's hot, then the accumulator needs 
replacing. The only other thing normally could also but not likley the air 
flow meter is adjusted to lean.
John Hervey
www.specialTauto.com


<< Alright. Let's see who can figure this one out.
My car will turn over but not start. When I turn the key, I can hear the fuel
pump energize and pump for a second or two. If I shoot some starting fluid or
pour some gas down the intake, she fires up immediately and will run for a 
short
period of time until the gas is used up. Any ideas?






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated