Re: [DML] Digest Number 1028

["Frederick R. Embden" <fembden@xxxx>]

> Message: 6
> Date: Wed, 15 May 2002 22:37:30 EDT
> From: DHughes030@xxxx
> Subject: Re: Thanks
>
> My RH coolant hose is also just as you described, even after replacing all
> rubbers. I saw one on a hoist at Kevin(?) Abato's site that looked the
same
> also.
> Don 6860
>

My right side water pipe was lower also, so I replaced my connecting hose
(RH) and loosened the upper connector then pushed up on the pipe, now both
sides are the same distance from the ground.

Fred.
DMC-Xll (NY)