RE: [DML] foam gasket on blower
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] foam gasket on blower
- From: "K Creason" <dmc4687@xxxx>
- Date: Sun, 12 May 2002 21:45:07 -0500
>Check for a relatively large foam sealing gasket (about 1/2" thick and
maybe
>2." by 4") at the back of the heater/blower housing under the pass side
dash.
hmmm... this could be where the foam that blew out of my vents came from...
Back to the Home of PROJECT VIXEN