Re: [DML] CV boot help.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] CV boot help.



Hugo,
CV boots are a piece of cake compared with some other repair jobs on the
DeLorean. Order the boots, all four of them from your DeLorean dealer ahead
of time. Do the job right the first time. Put the car up on jack stands,
remove all of the little bolts on both ends of each axle, and give a tug on
the axle and they pop right out. Take apart each end one at a time, wash
them up in solvent, blow or wipe dry, apply new grease and reassemble new
boot. Turn axle around and do the other end. Give the axle a new coat of
paint and reinstall. Make sure to torque the bolts, don't remember the spec.

Also check the oil seals in the main carrier, if these are leaking now is
the time to change them also.

----- Original Message -----
From: "miami5606" <miami5606@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Thursday, March 28, 2002 2:02 AM
Subject: [DML] CV boot help.


> I will be changing My inner driveshaft boot soon and was wondering if
> I could get any suggestions or warning tips to help me with the
> process.






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated