Re: [DML] Front suspension - stuck on step two.... (got wheel off sucess
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Front suspension - stuck on step two.... (got wheel off sucessfully)



Jim,
What shims are you referring too? I don't believe the front 
suspension has any shims (unless you are referring to the washers 
which are different). I know that the rear trailing arms have shims 
for alignment.

Steve
<SNIP>
> 
> Don't seperate the ball joint. No need. Remove the upper control 
arm pivot 
> bolt and you'll have plenty of room to work. Watch that you 
reinstall the 
> shims properly and retorque when reassembling.
> Jim 6147.






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated