Re: [DML] Front suspension - stuck on step two.... (got wheel off sucessfully)

[jwit6@xxxx]

In a message dated 2/28/02 11:58:34 PM Eastern Standard Time, 
tylergraves@xxxx writes:

<< How exactly do I seperate the 
lower ball joint from the steering knuckle? I've got the nut off with 
no trouble but it doesn't want to seperate! >>

Don't seperate the ball joint. No need. Remove the upper control arm pivot 
bolt and you'll have plenty of room to work. Watch that you reinstall the 
shims properly and retorque when reassembling.
Jim 6147.