For those of you who care to know, I posted some questions earlier, but no one answered them. Since then I have figured out the answer for myself. This isn't mentioned in any of the manuals, so Wayne, if you are reading this take notes for your new manuals project. > Is there some sort of adjustment > that I haven't noticed to loosen the emergency brake pads so that they don't > touch the rotor? Yes. When I put on my new parking brake pads, some of them didn't even have enough room to slip in between the rotor and the caliper. On the front edge of the assembly there is a large adjustment screw, but at first glance it doesn't look like an adjustment. It is the large screw that holds the two halves together at the front. The slot where you stick a screwdriver to tighten/loosen it is filled in with a cotter pin to stop it from loosening. So to make this adjustment you will need to remove this cotter pin. Walt Tampa, FL