Re: [DML] Replacing the headlight...

[Martin Gutkowski <webmaster@xxxx>]

Hi Richard

There are two screws along the top which go through two "tabs" in the chrome bracket -
you have to lift up the fascia to see them. The bracket also has a screw on each side -
but at different heights. They are like this because all four brackets are identical and
it allows them to sit next to each other.

In between the headlights, you have a black strip thingy which mounts to the LOWER
mounting screw, and one of the two top mounting screws of the outer light. This has a
hole in it to allow access to the adjustment screw. Don't confuse this with the mounting
screw!

A lot of what I've said above probably doesn't make sense, but I promise as Doc Brown
said "it all becomes clear" :-)

There are two screws at the top, and one each side, but you have to remove the black
strip first, which on one side of the car will mean removing one of the mounting screws
fo the other light......

Oh I'm messing this up. I'd go and take a picture but the car's under cover! I had the
"advantage" of my car missing one of the black strips so I could see how it all went
together! If you get stuck, I'll draw it for you.

Martin
#1458

RJRavalli@xxxx wrote:

> I will have to do this all in daylight as suggested, as I am not seeing
> the smaller screws that are supposed to be under the light. As
> Webmaster said, I am only seeing the ones above, but as Dave
> admitted my other screws may just be missing.
>
> Thanks for the help everyone,
>
> Richard