Re: [DML] No Spark
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] No Spark



Mike, Is there voltage going to the left side of the resistor. blue/yellow 
wire. If not, check for a loose connection on the solenoid, resistor, relay 
or a broken wire. If it's there then the voltage goes from the starter 
solenoid to the relay to the resistor. If all else fails and you have 
voltage, look for a bad resistor. You should have about 10.7 volts when 
starting. You can also by pass the resistor with the blue/yellow to start the 
car then back to the resistor. If it still doesn't get fire, you can check 
the coil, ECU and there is a pulse coil in the distributor. It could be shot.
John hervey
http://www.specialtauto.com/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated