Re: [DML] Heat Stove Function.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Heat Stove Function.



Robert, I just wanted to confirm with you. I to had removed all the air mass 
sensor and ran a flex pipe straight off the bottom of the air breather to the 
hole in the rear quarter panel. I saw a considerable amount of pickup. I also 
adjusted my air flow meter after the car warmed up to compensate if any. 
Coupled with 93 octane gas and the HV coil, I see a considerable pickup. I 
have take people riding in my car and they can't believe something else 
hasn't been do to it. One other note, if the air mass isn't working 
correctly, there will be a restriction of air and a possible richer mixture 
when running. If the valve doesn't open then it will pull hot air all the 
time off the exhaust manifold. 
John hervey
http://www.specialtauto.com/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated