Re: High Hood
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: High Hood



Actually the hood is quite adjustable. There are rubber stops at each 
upper corner that can be screwed up and down into the body, and I 
believe that the latch is also slightly adjustable. 

Did you have the fenders off the car? You may have reinstalled them 
missing the usual pile of shims between the fiberglass and the 
fenders. I've seen cars with as much as 1 cm of spacers/washers in 
between the fender and the fiberglass at the top edge. The production 
tolerances on the fiberglass underbody were far from perfect. 

Dave Swingle

--- In dmcnews@xxxx, "Paul Salsbury" <paul.salsbury@xxxx> wrote:

> Iwant to, need to adjust my hood, Now that the car is fully back 
together the hood sits to high above the fenders. It lines up 
perfectly with the front facia and progresivly gets higher as you get 
closer the wind screen.
> 
> From what I can see there is no room for adjustment.
> 
> What can I do?







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated