Re: [DML] Brake Lights (again)

[jwit6@xxxx]

Interesting thing I found on my car #6147. Although the single green 
wire to the brake switch is powered all the time, under the dash in 
the same area as the switch, is another spade connector with 2 green 
wires attached that is switched. It was taped up out of the way with 
what appears to be factory red tape. 
Jim 
--- In dmcnews@xxxx, "Walter" <Whalt@xxxx> wrote:
> From: <jwit6@xxxx>
> > The green wire at the stop light switch under the dash should 
have 12V on
> it
> > all the time, independent of the ign switch position.
> 
> Not necessarily. There are variations in the brake light wiring. 
Some cars
> have the brake light switch hot all the time like Jim said, and 
others are
> only hot when the ignition is on.
> 
> Walt Tampa, FL