Re: [DML] update on speedo noise
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] update on speedo noise



A previous owner of mechanic probably "fixed" the angle drive by
epoxying the input shaft to the dust cap.

John Yeoman

--- In dmcnews@xxxx, "K Creason" <dmc4687@xxxx> wrote:
> Hmmm... the cable from AD seems to be fused with the cup. I am
trying a
> punch before I break the AD by pulling the cable end out.
> 
> ----- Original Message -----
> From: "K Creason" <dmc4687@xxxx>
> To: <dmcnews@xxxx>
> Sent: Sunday, October 07, 2001 4:07 PM
> Subject: Re: [DML] update on speedo noise
> 
> 
> > Another Question...
> > if you turn the LF wheel by hand while it's on jacks can you
normally hear
> > clicks and action from inside angle drive at the start of the
motion? Or
> > should I be working this problem until the AD is completely
silent?
> >
> > 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated