Thanks for the idea! actually DMCJoe helped me on this one. we found out that the accelerator cable plastic sleeve had slipped out of a fitting right in front of the throttle spool, so the cable was hanging up about a half centimeter from the end of it, so my spool wasn't unwinding enough to trip the idle microswitch! i pushed the sleeve back into the fitting and all is fine now! Andy In a message dated 8/10/01 3:12:38 PM Central Daylight Time, 88mph@xxxx writes: > Hello, > > I follow the mailing list for a long time but it's my first post, so > a short presentation, I'm French, living in Luxembourg, I'm 29 years > old, owner of the n° 04271 since 1 year (bought for my birhtday! > pretty gift, isn't this?). I restored my car during one year, and to > have entirely dismounted it, I know many things about many parts of > this car. > > I know this problem, I had it too, it may be a vaccum disconnetion > (for my part, it was the problem). Check the connection of the vaccum > behind the Delco head (distributor cap : part 102751 and 102606), > there is an electric cable (with 2 wires) if I remember well. Just > plug it at its place and everything will go fine. > > All the best, > > Christophe. > Soma576@xxxx 1982 DeLorean DMC-12 VIN#11596 Fargo, ND 58102 [Non-text portions of this message have been removed]