RE: [DML] Dash Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] Dash Removal
- From: "Fernando Dillard" <fdillard@xxxx>
- Date: Tue, 24 Apr 2001 22:38:21 -0700
Mike,
What you need to remove is the binnacle. It is the part of the dash
that
encloses the instrument cluster.
There are about 8 or so small (I think 7mm) bolts that you need to
remove
near the steering column. The binnacle will then lift out and you can
disconnect the
two wire connectors and the speedo cable.
Fernando
VIN# 10811
----- Original Message -----
From: Michael
Pike
To: dmcnews@xxxxxxxxxxxxxxx
Sent: 4/24/01 3:37:46 PM
Subject: [DML] Dash Removal
I have to change my battery light bulb in my dash...
ugh.
[moderator snip]
Back to the Home of PROJECT VIXEN