Re: [DML] Welding my rusted frame

["Flash66" <flash66@xxxx>]

Thanks So much steve. Actually your website is what inspired me to check my
frame out.
If I may say, you did a fantastic job. I only hope mine turns out as good. I
am currently in the process of removing my tank. Im at a stopping point as
the fuel lines will not seperate(seized) and I twisted one of the metal
lines at the junction. It will need replacing. I hope when I get the tank
out, the routing of the metal line will not be to hard to reroute and
replace. Thanks for your hard work on your site! The pictures were of great
help !! Good luck on finishing your "D"

-Paul Catignani #16811

. I have
> pictures of the entire repair process on my website. (Project Delorean)
> www.angelfire.com/md2/projectdelorean Go there, go to the "My Delorean"
> section and check out the January and February entries in the "Frame"
> section. Also feel free to email me if you have any questions.
>
> Steve
>
> VIN 2650 "ProjectDelorean"
> www.angelfire.com/md2/projectdelorean