Re: idle problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: idle problem
- From: dherv10@xxxx
- Date: Sat, 14 Apr 2001 15:57:13 -0000
Klaus, As I said in an earlier post. Adjust the air flow with the 3mm
allen wrench. This will stop it from seeking and level out the idle.
Again: It should be done with an exhause analyzer.
John Hervey
www.specialTauto.com
--- In dmcnews@xxxx, klaus.steiner@xxxx wrote:
> Hi group,
>
> Following problem occurs:
> My engine idles between 500 an 1000 rpm when warm, idle speed
> microswitch works. When I press the full throttle enrichment
microswitch
> the frequency valve changes noise and the engine idles at 1000 rpm.
Any
> suggestions?
>
> Klaus Steiner
> #05980 Germany
> www.steinerklaus.de
Back to the Home of PROJECT VIXEN