Re: [DML] Door Alignment

["scottmueller.al" <scottmueller.al@xxxx>]

When you close the doors from the outside, make sure that you place your
hand by the toll booth window (the small window that opens). When inside
the car, pull with the strap. Also, check and see if you have the metal
guides, which are mounted on both the front and rear of the door, the
guides. If you are already closing the door correctly, then you may need
to adjust it.

Scott Mueller
scottmueller.al@xxxx
1981/002981 DOA5031/DMCNEWS


----- Original Message -----
From: Vin#5462 <dmc12@xxxx>

Sent: Wednesday, December 20, 2000 5:04 PM
Subject: [DML] Door Alignment


> Dear All,
>
> My doors are out of line and are hard to close, they are not hitting the
> latch pins correctly and make a clunk when I shut the doors, I can't
adjust
> the latch pins any more as they are a high as they can go. Is there a
> procedure for realigning the doors, I think the problem started when I had
> the gas struts off but it appears to be getting worse.
>
> Thanks in advance
>
> James RG



_____NetZero Free Internet Access and Email______
http://www.netzero.net/download/index.html