Re: [DML] trailing arm bolts & toe-in adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] trailing arm bolts & toe-in adjustment



Here are the answers to your trailing arm bolt questions.

Question 1)
> The Parts Manual and the Workshop Manual show the trailing arm bolts being
> inserted in opposite directions. Which is the correct orientation or does
> orientation matter?

A: Although the orientation is not critical the factory installed the bolts
with the heads facing outwards.


Question 2)
> How am I supposed to access the trailing arm bolts with the transmission
in
> the way? Do I have to move the transmission to get to it? Mine is an
> automatic transmission.

A: Yes.

Question 3)
> Does the design rely on pressure from the rubber bushing to hold the
alignment spacers in place?

Yes

Question 3)
Does torquing the trailing arm bolts compress the rubber bushing enough to
> affect toe-in adjustment?

A: Each bushing is fitted with a steel sleeve which limits the amount of
compression.


i.e., Should I only take measurements with the
> bolt fully torqued?

A: Yes


"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated