Re: [DML] Shift linkage adjustment

["DMC Joe" <dmcjoe@xxxx>]

Robert, Sorry, I somehow left of the last sentence of this post.

Here it is again with the missing sentence added.

Robert,

There are four nuts involved with gear shift linkage adjustment. Two each on the crossgate cable and two on the gear change tube. Which one are you referring to?

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message ----- 
From: Robert Rooney 
To: dmcnews@xxxxxxxxxxx 
Sent: Wednesday, September 06, 2000 3:45 PM
Subject: [DML] Shift linkage adjustment


Does anyone here know the size of the nut on the shift linkage cable 
that's used for adjustment? I've tried using pliers, but the handle's 
are always too long to rotate the nut once I do get a grip on it. All 
of my open-end wrenches are American and none fit, so I'm guessing 
that the nut is metric (probably 10mm like almost everything else, 
but I just wanted to check first). Also, does anyone have any 
suggestions on loosening this nut? Any ideas would really be 
appriciated!

-Robert
vin 6585






[Non-text portions of this message have been removed]