Re: [DML] Needle still straight up!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Needle still straight up!
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Mon, 28 Aug 2000 03:58:36 -0400
Paul,
The black wire is ground (earth) and is part of the front wire harness. This harness is grounded at the top front of the frame extension where the LH horn is attached.
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>
----- Original Message -----
From: paulheymeson@xxxx
To: dmcnews@xxxxxxxxxxx
Sent: Sunday, August 27, 2000 6:21 PM
Subject: [DML] Needle still straight up!
For all who read my last post.
I have had my dad move the wires to the sender and multiplug with me
sitting inside and no different on the gauge.
So I was wondering as my fuel gauge does start working again then not
i.e if you go over a bump in the road,perhaps it's a bad earth?
Does anyone know which wire of the 3 is the earth and where does it
end up?
If it leads to a bolt on the frame I could clean It up.
Many Thanks.
Paul.Vin 741.
Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address:
moderator@xxxx
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN