Re:Door Lock solenoids
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re:Door Lock solenoids



In a message dated 4/7/00 10:02:33 AM Eastern Daylight Time, dmcjoe@xxxx 
writes:

<< you will probably
have to install new solenoids as well. >>

I just wanted to mention that burned out solenoids can be very easily 
rewound. I've done it by unwinding the old wire (measure and record the 
length) and getting the same gauge and length and carfully rewinding the 
solenoid. The wire can be obtained from shops that repair power tools, 
alternators, electric motors etc. The cost for the wire was just a few 
dollars. Just be sure to use the same gauge and length as the original.

Burke




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated