[DML] Re: Aligning Doors

["DMC Joe" <dmcjoe@xxxx>]

The complete door installation and door alignment procedure can be found at
P:02:09 in the workshop manual.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <Delorean17@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, March 19, 2000 12:05 PM
Subject: [DML] Aligning Doors


> Hello list,
> IT WORKED: I put the torsion bars on with no problems this morning
after
> church. The passenger door goes up a little faster than the drivers side
but
> I can live with that. Now I need to align the doors. The latches are so
far
> off from the striker pin that the doors wont shut properly. Do you adjust
> them buy moving the 4 bolts that hold the doors onto the hinges? All 4
had
> to come off when the new door went on so I am guessing they are just not
in
> the correct spots. could someone please tell me how this is done?
>
> I would like to thank all of you for helping me out.
>
>
> David
> #2496