[DML] Re: Mirror switch - Jumping Procedure

["DMC Joe" <dmcjoe@xxxx>]

The mirror switch adjuster is non-serviceable as you have discovered. New
switches are available from us and the other DeLorean part suppliers for
$54.09.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: Jonathan Heslop <gatewayaag@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, March 18, 2000 7:43 PM
Subject: [DML] Mirror switch - Jumping Procedure


> It all started with an inoperative switch...............
>
> The window switch worked fine on everything but the horizontal control for
> the right side. I popped the switch out and began to take it apart. BIG
> MISTAKE!
>
> This is the most complex set of parts and wiring design I've ever seen for
> such a simple switch. The guy that desgined this must have been a mad
mad!
>
> Springs, rods, ball bearings, etc went all over the work bench when I
opened
> this thing up. I gathered the parts, cleaned the contacts, and spent two
> hours trying to get this thing back together. I took it out to the car
and
> hooked it up. It worked!! I pushed in into the hole and went to put the
> knob back on. I pushed on the knob to secure it and that's when it
> happened........POP! The back came off and those dozen little parts shot
> into the door panel. I retrieved a good number of the parts after hours
of
> searching, but the rest are gone for good.
>
> Does anyone have a junk window selector switch or some of it's
components??
> I'm missing one of the BB's, a "bar bell" rod, and the bigger of the two
> springs (used behind the BBs).
>