[DML] Re: A DMC problem

[Lee <Lee@xxxx>]

At 06:40 PM 1/10/00 EST, you wrote:
>Hello,
> I finally installed my rebuilt starter and solenoid today hoping it
would 
>solve my problem but it didnt. When I turn the key a little I hear the pump 
>going and when I turn it all the way to the starting position I just get one 
>click from behind the passenger seat. what could be the problem? I look 
>forward to your responses. I know there was a starter update that my car
has 
>not yet received, but wouldnt the starter atleast move without it? I REALLY 
>WANT TO GET THIS RUNNING! 
>
>oh yeah, where do you put the oil in in this thing? I just drained it
today 
>and need to refil it.
>
>Thanks
>
>David
>VIN #2496
>
David,

You no doubt will have expert advice on this one so here are some simple test.

Find a jumper cable and by-pass the starter solenoid (battery to starter
side of the solenoid). The starter should come to life. If it does not,
check your ground to the battery.
you will know the starter is good. If you don't get a running starter try
the jumper at the starter terminal, again it should run, if not the starter
is the problem.

You can use a trouble light to test if the start solenoid is functioning.

AS the relay stuff: that past any thing I have done on the D so I leave
that to others.

Good luck

Lee

support@xxxx

NOTICE TO BULK EMAILER: Pursuant to US Code, Title 47, Chapter 5,
Subchapter II, 227, any and all unsolicited commercial e-mail sent
to this address is subject to a download and archival fee in the
amount of $500 US.
E-Mailing denotes acceptance of these terms.