[DML] Re: Those darn hoses.

[CBL302@xxxx]

In a message dated 10/5/99 6:23:44 PM Eastern Daylight Time, 
jtrealty@xxxx writes:

<< although it is true the engine does not need to be removed
tou will need to disassemble the top of it to get to
the hoses behind the water pump.Also check the "o" rings
under the water distribution pipe. Before you reassemble
the engine pressure test to 10-12 psiat least for 15 min >>

Also when you replace the hoses under the Intake manifold be sure to put on 
two hose clamps on each end as insurance that the hoses will not leak.(they 
are real hard to get at if they should come loose or leak)

Claude
Vin#000570