[DML] Re: clutch problems

[magriese@xxxx]

Travis - This does sound like a plastic clutch hose problem.
Before you go to the trouble of replacing the line, check the
clutch fluid reservoir to make sure you aren't low. You should
also try bleeding the clutch first to make sure you don't have
any air in the lines - particularly if the fluid level was low.

Mike Griese
Storage Software Development Manager
IBM Storage Systems Division
Rochester, MN 55901
Internet: magriese@xxxx
voice: (507)253-1853
fax: (507)253-2880



------------------------------------------------------------------------

eGroups.com home: http://www.egroups.com/group/dmcnews
http://www.egroups.com - Simplifying group communications