[DML] Re: Lambda Sensor/Light Relationship
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Lambda Sensor/Light Relationship
- From: "DMC Joe" <DMCJOE@xxxx>
- Date: Wed, 12 May 1999 12:51:26 -0400
If you had a situation where the voltage gauge was below 11 volts and you
had to jump start the car you either have a bad battery or a problem in the
charge circuit. If the blower comes on and than shuts off you may have a
defective blower circuit breaker.
DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>
----------
> From: yugoman <mdrig@xxxx>
> To: dmcnews@xxxxxxxxxxx
> Subject: [DML] Re: Lambda Sensor/Light Relationship
> Date: Tuesday, May 11, 1999 1:24 PM
>
> I thought maybe the light should come on briefly when started, like a
temp
> or charge light.
> I tried fuse for the blower circuit. A few times the fan would be
working,
> then quit after a few miles. Lately it hasn't come on at all. Also
sometimes
> the charge guage is dead, sometimes it will read (if that has anything to
do
> with the fan circuit?). When it went to the show, we had to jump it, the
> guage never moved, but it started at the show, so I assume it is
charging.
>
>
>
>
> ------------------------------------------------------------------------
------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/group/dmcnews
http://www.eGroups.com - Simplifying group communications
Back to the Home of PROJECT VIXEN