[DML] Re: cold starting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: cold starting
- From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
- Date: Wed, 28 Jul 2004 00:15:41 -0000
You are "supposed" to hold the gas pedal down 1/4 while starting the
motor. Some cars are more sensitive than others and most don't require
this. You could also have a problem with the cold start valve system.
Check if the cold start valve is getting power the next time you try
to start cold while cranking, you should see 12 volts on the valve.
The cold start valve could also be plugged up or defective (not very
likely). It might also be that you need a tune-up. How long has it
been? If you don't know, than it has been too long. Worn spark plugs
and old, bad ignition wires can cause this symptom.
David Teitelbaum
vin 10757
--- In dmcnews@xxxxxxxxxxxxxxx, "likl3189" <likl3189@xxxx> wrote:
> on a cold start I have to turn the key two times first for a couple
> revolutions and off then it starts instantly.
> It will not start on the first time.
> I may be losing fuel pressure when shut down but where?
>
> Mannyone
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN