[DML] Re: Good method of bleeding the Clutch?

["Dave Swingle" <swingle@xxxxxxxxxxx>]

I find that, at least the first time you do this, it's helpful to 
remove the engine cover lid. Then you can really look down in there 
and find the bleeder. 

Crack the bleeder loose, then put a hose on it into a bottle. Open 
the bleeder with a srench and have the assistant push the clutch 
pedal as you open the bleeder. I generally have not found it 
necessary to to the open/close/open/close drill, I just pump it a few 
dozen times until the fluid is clear without bubbles. Tighten the 
bleeder when the pedal is at the bottom of the stroke.

I did make up a tool to make this a bit easier. I brazed a 7 mm deep 
socket onto a piece of 1/4 plumbing pipe that's about a foot long. I 
put a small piece of hose in the socket to act as a seal, and brazed 
a tube fitting on the other end of the pipe. Now I can put this on 
the bleeder, with the hose off the other end of the pipe, and turn 
the pipe with a wrench. Avoids a lot of agony. After bleeding it I 
cap my finger over the end of the pipe and pull it away quickly, this 
spills very little left over fluid. 

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, "joeyoseppijoe" <joeyoseppijoe@xxxx> 
wrote:
> I will be replacing the clutch master cylinder on one of my cars, 
> main question is that after the new one is installed, what would be 
> the proper way to bleed it out to have it work properly again. If 
> anyone has a little write up on this procedure I would be most 
> greatful. I will be doing this with a partner, so I will be able to 
> have someone help me bleed it out, just what is the best way to 
> reach back there to bleed it I guess I am trying to ask. Any hints, 
> tips, etc. would be great. 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/