[DML] Re: Removing Angle Drive Circular Spring

["thebrave65" <johnnysher1@xxxxxxx>]

Ah, yes.  The dreaded snap ring.  I tried the same thing but mine 
turned out to be totally corroded to the nut and the AD.  I ended up 
using a hammer on the angle drive and it popped out of the nut after 
a good beating.  The snap ring was almost fused to the AD.  Funny how 
my angle drive started to work again after I used a hammer on it...

Johnny
5518


Does anyone know how to remove the circular spring from the old  
angle drive
 so you can retrieve the large nut?  The instructions say compress 
the spring
 with two small screwdrivers, but I don't find that possible.
 
 Thanks for your help!
 
 Bob Hlavacek
 10961




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/