John - Rather than making you go look for it, here is that post in it's entirety: "The correct orientation is as follows: From the forward attachment at the frame crumple tube, the bar angles down, and then up, and then plugs more or less straight into the lower control arms. If the bar was upside down, the angle from the bar to the lower control arm would be all wrong. Do you have the proper tire size on the front? If you use a wider profile, you may get a little more chance of contact. I have seen other cars that did show the same wear area that you are reporting, and they didn't have anything wrong. There is a picture in the "techie stuff" folder in the Photos section that shows a portion of the bar installed. The focus of the picture is my front lower control arm links that I made, but if you look beyond that, you'll see the bar orientation. I hope this helps." To find a particular message number, you must be on the DML website. I understand that some people use email exclusively to communicate with the rest of the List. On the site, there is a search box for message number. You simply type in the number, click on the "go" button, and it takes you straight there. Toby Peterson VIN 2248 (Winged1) DeLorean Parts Northwest, LLC www.delorean-parts,com --- In dmcnews@xxxxxxxxxxxxxxx, John Podlewski <john_podlewski@xxxx> wrote: > Some time ago I put a post about my front tires rubbing on the sway bar and was told to check msg. 38238. My Question is how and where do I find it? Is it in the archives and how do you get into the archives because I can't find it. I realize I'm probably not doing it right so exact instructions would help out alot. > THANKS! To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/