[DML] Testing Lambda thermal switch

["sweetp01569" <paul.sweet@xxxxxxxxxxxx>]

Using the MYDELOREAN.NET How-to guide #19, I get an open circuit 
between pin 7 and chassis ground for the test in step 3 with the 
engine cold, which indicates a failed switch or wiring. I get open 
circuit when the engine is warmed up, which is supposedly correct. How 
else can I test the thermal switch without removing the intake 
manifold and entering "the valley". I don't believe I have any weird 
idling symptoms, except for a little hesitation (like it wants to skip 
cylinders) when I press the gas when the engine is cold. Is this a 
possible symtom of a bad thermal switch?

Thanks,

Paul


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/