Re: [DML] Stock Speakers: (WasTo Cut or Not to Cut)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Stock Speakers: (WasTo Cut or Not to Cut)





Removing the seats makes things a lot easier. It's only eight nuts total. I have a small bench about the same height as the DeLorean's threshold and instead of getting all the way into the car I lay across the bench and I'm only in the car from just below the shoulders up. 

  Bruce Benson


  Due to the contortion factor, I found this to be one of the worst 
  tasks I've attempted on my D in the year-and-a-half I've had it. 
  Getting in-and-out of the tight spaces holding a flashlight in my 
  aching jaw, dropping the nuts in my eyes more than once and having 
  to get wriggle back out from under the dash to find them, etc., was 
  pure agony. A pair of safety glasses with lights would be worth 
  considering...

  The speakers themselves were no problem... I bought a pair of Bosch 
  3.5's for $30 at Fry's Electronics. They had just a very slight 
  center dome protrusion. They'll handle 40 watts or so. I just 
  didn't crank 'em down hard when reinstalling and haven't noticed any 
  rattling or dash problems.

  Fortunately, since then, John Spangler came up with a relatively 
  painless way to accomplish the speaker replacement task using a 
  little glue and a mirror. Check out his front speaker project at 
  johnspangler.com and plan before you work! Your back will thank 
  you. 

  Marv
  #10820
  AZ-D




   

[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated