 
Re: [DML] Stock Speakers: (WasTo Cut or Not to Cut)
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Stock Speakers: (WasTo Cut or Not to Cut)
- From: "Marv Hein" <marvhein@xxxxxxxxxxx>
- Date: Thu, 02 Nov 2006 16:55:19 -0000
Due to the contortion factor, I found this to be one of the worst 
tasks I've attempted on my D in the year-and-a-half I've had it. 
Getting in-and-out of the tight spaces holding a flashlight in my 
aching jaw, dropping the nuts in my eyes more than once and having 
to get wriggle back out from under the dash to find them, etc., was 
pure agony.  A pair of safety glasses with lights would be worth 
considering...
 
The speakers themselves were no problem... I bought a pair of Bosch 
3.5's for $30 at Fry's Electronics. They had just a very slight 
center dome protrusion.  They'll handle 40 watts or so. I just 
didn't crank 'em down hard when reinstalling and haven't noticed any 
rattling or dash problems.
Fortunately, since then, John Spangler came up with a relatively 
painless way to accomplish the speaker replacement task using a 
little glue and a mirror. Check out his front speaker project at 
johnspangler.com and plan before you work!  Your back will thank 
you. 
Marv
#10820
AZ-D
--- In dmcnews@xxxxxxxxxxxxxxx, "Nick Kemp" <nkemp@...> wrote:
>
>  When I replaced the fronts, rather than fit spacers, I installed 
two new
> rivnuts & bolted the speakers in.  Very easy ... if you are a 
contortionist.
> 
> Nick
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
    Individual Email | Traditional
<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)
<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN