The door lock itself turns fine and I have just the one key. It seems to have more to do with the door latch itself. When the Z shaped lock rod pulls on the arm of the door latch, the arm seems to stick a little before giving in with a "thunk." It did it both with the new and old one, and as far as I can tell, it does it on the drivers side (I haven't taken it apart, I've only felt it). I have observed it while I was locking and unlocking the the car from the inside... You know, as I write this I'm thinking I might need to tighted the door lock cable since it affects the travel of the door lock rod when the car is unlocked from the outside. Hmmmmmmm. > > My passenger door lock sticks when I try to unlock the > > door. > > Define, "stick". I think what your are describing is that > the key does not > turn easily as if you had put the wrong key in the lock. If > this is your > case and you replaced this lock, then I say you need some > locksmithing work > done. > > Let us know if you have the one-key system or two-key system locks. I > assume you have the one-key because NOS two-key systems are > not available. > > Walt Tampa, FL >