Follow all of Mark's advice. Pay particular attention to replacing the "caps" and resoldering all of the joints to eliminate any possibility of cold solder joints. Worst case you might have to replace some of the transistors but most of the time replcaing the caps and resoldering will "fix" it or at least get it going. If you are patient and have a few extra bucks we might soon have a Transzilla available. In the meantime Mark's tips will get you going again. Be very careful not to drive too fast in 2nd gear as mechanical damage caused by a defective govenor will require you to rebuild your transmission. Test the downshift switch and wiring to make sure it isn't forcing you into 2nd gear. David Teitelbaum vin 10757 --- In dmcnews@xxxx, "Adam Price" <acprice1@xxxx> wrote: > Today my car would not shift out of 2nd gear. I have had transmission