RE: [DMCForum] Exhaust Manifold Questions

[<rob@xxxxxxxxxxx>]

Mark,

I strongly recommend replacing all of the studs (both 7&10mm). We offer a
complete exhaust kit with all stainless studs or you can buy them
separately. If you don't change them all often times one or two studs will
break soon after the job requiring you to do the whole thing over. It's just
not worth the risk.

Rob Grady  

P.J.Grady Inc.

-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of DMCVIN6683
Sent: Wednesday, October 26, 2005 5:35 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Exhaust Manifold Questions

The studs that are on the heads that hold the exhaust manifold to it 
are all on my car except 1 has broken off.

My question is after i remove and replace the 1 stud cant i just clean 
the threads on the old studs and leave them alone and reuse them?

Do i really need to install new studs?

Mark V




 
Yahoo! Groups Links



 



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/148 - Release Date: 10/25/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/150 - Release Date: 10/27/2005
 



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/