Re: [DMCForum] Re: crush washers on the fuel distributor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: crush washers on the fuel distributor



Copper washers are 8mm, 10mm and 12mm. Of these three sizes, 2 are 10mm, 
5 are 12mm, the rest are 8mm. The one you've lost is for the cold start 
valve.

In answer to your question below: look at the inside of the "banjo"

Martin

Andrew wrote:

>I love replying to myself.
>
>Something else I forgot to mention.  I noticed that the bolt that
connects 
>the fuel line to the distributor has holes at the top in only two places.

>Is there some trick to getting one of these holes to line up with the
fuel 
>line, or will it simply work?
>
>-andrew
>  
>




To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx





  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
  

*	To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
<mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 


<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated