yar, at first I thought we were talking about a cooler like a oil cooler, then it occurred to me that we were talking about something more like a power steering fluid cooler, just a metal tube that winds around for a while. I have a very small oil cooler off the cosmo. Maybe I will just reuse that. It's free and will probably have pretty good heat transfer properties. Jim On Wed, 3 Dec 2003 12:12:56 -0500 "Andrei Cular" <acular@xxxxxxxxxxxxxxx> writes: > >uh, was the mineral spirits 8 inches off the ground? > > No it was on the ground. I measured to the top of the pump outlet. > But now > that I am thinking about it the hose was in a full gal can which > means the > pump only had to pull up about 9'. Maybe I should run the spearmint > again > with a true 10' head. > > >where do you propose to put the cooler? I'd consider this because > the > >rotary makes the fuel really really hot. My tank has significant > >positive pressure after a short time driving, I assume it's because > of > >the heating/expansion of the fuel. > > My chiller block can go anywhere in the line as long as it has room > for air > to flow over the heat sink. I would make it out of 6061 Al so it > can be > tapped with any thread you need. > > > > Andrei > > > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ------------------------ Yahoo! Groups Sponsor ---------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>