RE: [DMCForum] Re: Dig this... a groovy idea
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Re: Dig this... a groovy idea



I haven't actually tried it yet, but remember someone stating they were
available at Auto Zone in the 1156, 1157, and 194 versions I believe.

Greg

-----Original Message-----
From: cruznmd [mailto:racuti1@xxxxxxxxxxxx]
Sent: Thursday, October 30, 2003 2:30 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Dig this... a groovy idea


Ok, so they might plug into the board, but as you were calculating,
would they need resistors wired in, or are they "plug 'n play"?

I think they would give our cars an upgraded look. Plus, you'd be
more visible.

When I drive, it's like being in a sea of tires and hub caps.

--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> Not really. I just forgot they even existed! Duh.
>
> > -----Original Message-----
> > From: timnagin [mailto:timnagin@xxxx]
> > Sent: Thursday, October 30, 2003 2:15 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: RE: [DMCForum] Re: Dig this... a groovy idea
> >
> > Exactly. Would these not work or are you going after a different
end
> > result?
> >
> > Greg
> >
> > -----Original Message-----
> > From: Travis Goodwin [mailto:tgoodwin@xxxx]
> > Sent: Thursday, October 30, 2003 1:58 PM
> > To: 'DMCForum@xxxxxxxxxxxxxxx'
> > Subject: RE: [DMCForum] Re: Dig this... a groovy idea
> >
> >
> > I think he's talking about the LEDs that have been converted with
an
> > incandescent base.
> >
> > > -----Original Message-----
> > > From: cruznmd [mailto:racuti1@xxxx]
> > > Sent: Thursday, October 30, 2003 2:09 PM
> > > To: DMCForum@xxxxxxxxxxxxxxx
> > > Subject: [DMCForum] Re: Dig this... a groovy idea
> > >
> > > There are LED drop in replacements for the DeLorean?
> > >
> > > Who makes these?
> > >
> > > Rich
> > >
> > > --- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx>
wrote:
> > > > Would the LED drop-in replacements not suffice?
> > > >
> > > > Greg
> > > >
> > > > -----Original Message-----
> > > > From: Travis Goodwin [mailto:tgoodwin@xxxx]
> > > > Sent: Thursday, October 30, 2003 1:42 PM
> > > > To: 'DMCForum@xxxxxxxxxxxxxxx'
> > > > Subject: RE: [DMCForum] Re: Dig this... a groovy idea
> > > >
> > > >
> > > > Hmmm. That's a good idea. I might have to make this a handy
winter
> > > project.
> > > > I'm not a EE the whole thing should be simple. LEDs and
resitors
> > > and that's
> > > > it. All you need to know is what kind of inline resistor to
use.
> > > >
> > > >   R = (Vbattery - Vled) / (IVled),
> > > >
> > > > You've got 12-14V supply (Vbattery). Most LEDs have a .02A
forward
> > > current
> > > > (Vled) regardless of brightness. The forward voltage of the
LED
> > > (FVled) is
> > > > indicated on the package. This varies with brightness.
> > > >
> > > > If I use the super bright I bought and stuck it in the car
I'd have
> > > the 12V
> > > > from the battery with an LED with 2.4V forward voltage
and .02A
> > > forward
> > > > current. That gives me a 480Ohm resistor.
> > > >
> > > > One 480ohm resistor per LED mounted on the board. Hell, you
could
> > > probably
> > > > use the existing circuit board and just drill mounting holes
for
> > > the lights.
> > > >
> > > >
> > > > Thus endeth the lesson.
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: cruznmd [mailto:racuti1@xxxx]
> > > > > Sent: Thursday, October 30, 2003 1:41 PM
> > > > > To: DMCForum@xxxxxxxxxxxxxxx
> > > > > Subject: [DMCForum] Re: Dig this... a groovy idea
> > > > >
> > > > > Hey Travis,
> > > > >
> > > > > Any chance of figuring out how to adapt red LED's to our
> > > tail/brake
> > > > > lights and losing the light bulbs?
> > > > >
> > > > > Maybe even the turn signals?
> > > > >
> > > > > Rich
> > > > >
> > > > >
> > > > > --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin
<tgoodwin@xxxx>
> > > wrote:
> > > > > > Just went out to Radio Shack and bought 2 super bright
red,
> > > jumbo
> > > > > LEDs. My
> > > > > > plan is to build 2 small boxes that will attach to the
exhaust
> > > > > vents of my
> > > > > > BTTF conversion. Now the exhaust vents will glow an eerie
red
> > > all
> > > > > the time
> > > > > > and the fog will be red at night.
> > > > > >
> > > > > > Hopefully I'll have pics tomorrow if it works out.



Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512
6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore
dir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=931090149> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated