Spark plug's at an odd angle to try this. Also need to be careful not to score cylinder wall. Passenger valve cover easy to remove because nothing in the way. Is also good opportunity to upgrade gasket to rubber. Rich just needs to ensure 9 degree spec in tech manual is correct. Martin... Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote: > > If correct, you could pop off valve cover and watch > rocker arm start to move... > > Bill, it seems like it would be more elegant to pull the #1 spark plug and > stick a rod in the hole. Move the crank until the rod is at the highest > point. Would this work? It would sure beat taking the valve cover off > (unless you wanted a good excuse to adjust the valve lash.) > > Walt Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.4074964.5287182.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.4074964.5287182.1261774/D=egroupm ail/S=:HM/A=1732161/rand=188259319> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>