[DMCForum] Compression Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Compression Question



Recently bought own compression gauge with fresh O rings and long plug
extension. Readings on my R30 are basically 170 psi across all six
cylinders (one @ 160 but still within tolerances).

Message #35724 in other group measured at 130 psi.

What kind of readings are other people getting? 

Websites claim my 2.5 liter R30 puts out 145 HP, so am wondering if
Fench used different pistons or heads. Also wonder about cams -- my
engine seems to rock & roll more than stock DeLo. Martin G: want to
run this past Darren?

Been running lean & hot (vacuum leak, finally located) so isn't carbon
buildup.

Bill Robertson
#5939




Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732163/R=0/SIG=11n0nglqg/*http://www.ediets.com/start.cfm?code=
30510&media=zone> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732163/rand=999101195> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated