[DMCForum] Trailing Arm Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Trailing Arm Bolts



Finally got around to installing my Toby Peterson Super Duper Bolts.
Lessons learned:

Support car on ramps rather than jack stands. Only way I could keep
bolts from binding was to jack free wheels closer to normal road stance.

After 20,000 miles original 10.9 bolts were almost 100% straight and
had only slight surface rust on trailing arm surface (frame bushing
area totally clear. And my car came from NJ/PA). If you missed last
production run wouldn't sweat it -- am sure the 12.9's John Hervey
sells are more than adequate. Walt Coe also personally sells a heavy
grade replacement in conjunction with Martin Gutkowski.

These bolts are VERY small diameter compared to a major domestic
luxury car manufacturer than shall remain nameless.

Will bring my originals to Fall Foliage if anyone wants to see what
20,000 miles looks like. Am planning to bring on all future caravans
just in case someone loses one in transit.

Bill Robertson
#5939






Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732161/rand=925345663> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated