Re: [DMCForum] Regraining Stainless
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Regraining Stainless



> What grit sandpaper is recommended to regrain the SS?

Rob Grady told me that anything less than 80 grit tends to polish more
than
create grain.  Once you get it looking even then following up with the
proper variety of Scotch-brite pad mellows it out.

Doing it by hand is a lot harder than it looks.  Long strokes are very
destructive because the further you push the paper, the deeper it
progressively cuts.  You can end up with very deep gouges that way.  Short
quick strokes work the best for me.  (Yes, I know that many of you think
I'm
a compulsive masturbater.)  I try to gently and firmly place the paper
against the stainless and then scrape and lift off in short strokes.
Hitting the paper against the stainless only seems to leave crooked lines
and "J" patterns.

Walt



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1754016/R=0/SIG=11pv1u2ju/*http://www.ediets.com/start.cfm?code=
30529&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1754016/rand=154344779> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated