My kit was for a Volvo 760 GLE, 1983. Which ones are you looking at? > -----Original Message----- > From: content22207 [mailto:brobertson@xxxxxxxxxxxx] > Sent: Monday, September 22, 2003 3:30 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: [DMCForum] FelPro valve cover gasket specs > > Checked out a set of FelPro #VS26090 at lunch. Indeed metal core with > rubber facings. Not thickest in the world -- about .045" -- but > imminently better than a piece of paper. > > Need metal core because people have tendency to over torque solid rubber. > > I have significant mismatch between timing chain cover and cylinder > head so seated gasket in a bed of silicone. If doing same remember you > need two torqings: one gentle just to flatten silicone, and one hard > after it's set up. > > Bill Robertson > #5939 > > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1732161/rand=118090702> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>