[DMCForum] FelPro valve cover gasket specs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] FelPro valve cover gasket specs



Checked out a set of FelPro #VS26090 at lunch. Indeed metal core with
rubber facings. Not thickest in the world -- about .045" -- but
imminently better than a piece of paper.

Need metal core because people have tendency to over torque solid rubber.

I have significant mismatch between timing chain cover and cylinder
head so seated gasket in a bed of silicone. If doing same remember you
need two torqings: one gentle just to flatten silicone, and one hard
after it's set up.

Bill Robertson
#5939




Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732161/rand=404298980> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated