If it fell into the oil pan it would spend its life lounging there. I never saw it in or around the chains. I even turned the engine over a bunch of times to verify there was nothing in there. > -----Original Message----- > From: cruznmd [mailto:racuti1@xxxxxxxxxxxx] > Sent: Monday, August 18, 2003 9:40 AM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: [DMCForum] Re: One nit-picky question > > It may not be critical to operation but you'll experience what we in > the Navy call FOD. Foreign Object Damage. > > Having a stray piece of metal drifting around in your timing chain > cover riding the oil currents is probably not a good idea. > > Ask the others though. I may be overstating the situation. > > --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > > Okay, bare with me as I attempt to explain my situation. > > > > During my procedure of replacing the RS cam sprocket, I had to get > into the > > timing cover and push the piston back in to slacken the chain. That > didn't > > give me quite enough room so I removed the tensioning arm just > below it. > > This gave me the room I needed to slip the sprocket back on. > > > > However, when I took the tensioning arm off, I thought I heard the > distinct > > jingle of metal falling and hitting metal. I never saw anything and > could > > never figure out what fell. Apparently a washer that rests against > the > > engine block fell when I removed the tensioner. > > > > If you look at items 12, 13, and 14 you'll see my concern. > > > > http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=9 <http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=9&PageCat=1%> &PageCat=1% > 2DEngine > > > > My question is, how crucial is this little washer? Should I take > the cover > > off (oh jeez, not again) and reinstall it? > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1693353/R=0/SIG=11t71ok4g/*http://www.netflix.com/Default?mqso=6 0178294&partid=3170658> click here <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1693353/rand=921720254> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>