I will have to disagree with your statement about use grease. I have built many engines and complex industrial pumps and compressors and have never had a problem using white or moly grease. As the engine warms up the grease will liquefy and be displaced by the oil. Perhaps you had used a wheel bearing grease when you rebuilt your lawn mower. Scott Mueller 002981 RNDOLA -----Original Message----- From: Andrei Cular [mailto:acular@xxxxxxxxxxxxxxx] Sent: Wednesday, July 09, 2003 7:30 AM To: DMCForum@xxxxxxxxxxxxxxx Subject: Re: [DMCForum] Re: The Moment of Truth DO NOT USE GREASE as assembly lube!!!! I personally killed one engine cause I used grease when I put it back together, luckily it was only lawnmower. You must use something that will easily dissolve as soon as the engine oil starts to circulate. White grease or Moly will stay inplace and block oil flow. I would use regular 20-50 oil before I use even the thinest coat of grease. STP engine treatment could also be called "engine honey" and can be used but I would still recommend getting a tube of real assembly / pre lube. It will cost about the same as a can of grease and you will know that your engine is safe. Andrei ----- Original Message ----- From: "Scott Mueller" <scott.a.mueller@xxxxxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Wednesday, July 09, 2003 9:14 AM Subject: RE: [DMCForum] Re: The Moment of Truth > White Grease, Moly Grease or STP also work well as an assemble lube. > > -----Original Message----- > From: Walter Coe [mailto:Whalt@xxxxxxx] > Sent: Tuesday, July 08, 2003 10:17 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: Re: [DMCForum] Re: The Moment of Truth > > > > Walt: Engine Honey? Never heard of it. I didn't take the pistons out. > > This is a particular brand of really thick oil used for coating engine > pieces during assembly. It helps prevent surface rust (if your project > takes too many days to finish). And it helps add lubrication for the first > time you start the engine. Otherwise cranking a dry engine isn't too good > for everything. > > Walt > > > > Yahoo! Groups Sponsor > > ADVERTISEMENT > > <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 62 > 15:HM/A=1652964/R=0/SIG=11t2ts2ch/*http://www.netflix.com/Default?mqso=601 78 > 276&partid=3170658> click here > > <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ai > l/S=:HM/A=1652964/rand=141333296> > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/> . > > > > > [Non-text portions of this message have been removed] > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > Yahoo! Groups Sponsor <http://rd.yahoo.com/M=249982.3512844.4795476.1261774/D=egroupweb/S=170512 62 15:HM/A=1524963/R=0/SIG=12o72ctft/*http://hits.411web.com/cgi-bin/autoredi r? camp=556&lineid=3512844&prop=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=249982.3512844.4795476.1261774/D=egroupm ai l/S=:HM/A=1524963/rand=329995497> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . [Non-text portions of this message have been removed] Yahoo! Groups Sponsor <http://rd.yahoo.com/M=249982.3512844.4795476.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o72ctft/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3512844?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=249982.3512844.4795476.1261774/D=egroupm ail/S=:HM/A=1524963/rand=756447644> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>